Panasonic X-Plus SeriesSP-DRH16 - Page 18

18
NO
Connection
Purpose
1
VIDEO IN
8 connectors for video input. (NTSC/PAL)
2
CVBS
Video output termal
3
SPOT
Spot out terminal
4
AUDIO IN
4 connectors for audio input.
5
AUDIO OUT
1 connector for audio output.
6
VGA OUT
Connector for VGA monitor.
7
HDMI OUT
HDMI out terminal.
8
ETHERNET
RJ-45 connector for LAN connection.
9
SENSOR IN
ALARM OUT
RS-485
4 connectors for sensor device connection.
1 connector for alarm device connection.
Provides simple On/Off switching by using relay. 0.5A/125V,
1A/30V
RS-485 control terminal
10
POWER SOCKET
Connect DC12V 5A Adaptor
11
USB Port
To archive still-image or video into a USB memory or
upgrade firmware with USB memory stick, connect a USB
memory to the USB terminal.
12
GROUND
Use for ground port
Figure 2.1.5. Rear panel (SP-DRH16)
NO
Connection
Purpose
1
VIDEO IN
16 connectors for video input. (NTSC/PAL)
2
CVBS
Video output termal
3
SPOT
Spot out terminal
4
AUDIO IN
4 connectors for audio input.
5
AUDIO OUT
1 connector for audio output.
6
VGA OUT
Connector for VGA monitor.
7
RS-232
For engineering use only.
8
ETHERNET
RJ-45 connector for LAN connection.
1
2
3
4
5
6
7
8
9
10
11
12
13
14