3-8-2-2. STATIC
1. For the use of fixed IP.
(See your network administrator if you do not have this information)
2. When DVR is installed in IP sharer that is connected with ADSL, a user can assign fixed IP to DVR
from IP sharer itself using “DMZ” function out of such sharer.
Input IP set in DMZ on “IP” field and Gateway of ADSL modem on “Gateway” field. Similarly, for Subnet
Mask, DNS address, input relevant values in IP sharer.
Table 3.8.2. STATIC
3-8-3. DDNS
User can use the function to connect to a network with a domain name. When it selects a Sever 1, user can
select one type among three DDNS Servers which be supporting for free. (bestddns.com is default) The
DDNS interval can be set from 5 to 60 minutes. To connect to a network with a domain name, user also has
to register a MAC address and create a unique domain name to http://www.bestddns.com. Please refer to
Appendix: How to connect network section for the detail of the registration.
Figure 3.8.2. Network setup screen – DDNS Server 1
If user wants to use other general-purpose DDNS Server, select a Sever 2. Then, user has to input the
server name, ID and password using a virtual keyboard.
Figure 3.8.3. Network setup screen – DDNS Server 2
3-8-4. Network Stream
User can set the resolution, the frame rate and the quality for a network stream classified by channel. It is
recommended that user should adjust each item to proper level to get the network service smoothly.
The maximum value for the network stream is CIF 15fps per channel but the recording resolution and frame