Panasonic X-Plus SeriesSP-DRH16 - Remote Control

19
9
SENSOR IN
4 connectors for sensor device connection.
ALARM OUT
1 connector for alarm device connection.
Provides simple On/Off switching by using relay. 0.5A/125V,
1A/30V
RS-485
RS-485 control terminal
10
POWER SOCKET
Connect DC12V 5A Adaptor
11
USB Port
To archive still-image or video into a USB memory or
upgrade firmware with USB memory stick, connect a USB
memory to the USB terminal.
12
e-SATA Port
1 connector for External SATA
13
HDMI OUT
HDMI out terminal.
14
GROUND
Use for ground port
2-3. Remote control
① ID: To set the remote control ID.
② REC: To start and stop manual recording
③ SEARCH: To go to SEARCH menu.
④ F/ADV:
 During playback – To move the playback position 60 seconds forward .
 During Pause – To move the playback position moves 1 frame forward
⑤ F/REW:
 During playback – To move the playback position 60 seconds back.
 During Pause – To move the playback postion 1 frame back.
⑥ FF: To fast forward the recording.
⑦ PLAY/PAUSE: To play or to pause the recording in playback mode
⑧ REW: To rewind the recording.