Note 1: This configure will not be changed when the scanner scans load default setting barcode.
Note 2: The tolerance is ±20%.
3-6 Indication
Power on alert: After power-on or restart, the scanner will generate alert signal (Beeper beeping and LED
flashing).
LED indication: When the scanner decodes successfully, the LED will glitter.
Beeper indication: After each successful reading, the scanner will beep to indicate a good barcode
reading, and its beep tone duration is adjustable.
Beep tone duration: This parameter can be adjusted for a good reading upon favorite usage.
Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper.
Frequency of beeper: This parameter can be adjusted for different level of the frequency of the beeper.
To Next Page
Loading...
