Panda MD2000 - Telepen

3-25 Telepen
Read:
Format
Start character (_)
Data digits (variable)
Check digit
End character (z)
Check digit verification: The check digit verification is optional.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: 3- 12 Code 39.
Code ID setting: Refer to Code ID setting of
selection:3-7 UPC-A.
Insertion group
Encode character set type: Two options. Same Telepen symbol,
with different option, is associated with different data output.
Alphanumeric- Supports both letters and numbers within the data source.
Numeric- Supports only numbers within the data source and ignores all letters.
Refer to Max./Min. code length of
.
3-7 UPC-A
Refer to Insertion group selection of