Check digit verification: The check digit verification is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Code ID is a one-or-two-character string used to represent the symbol upon a succeeding
reading. If you want application to transmit Code ID, you must set Code ID transmission to be enabled.
Refer to 3-31 String transmission.
Insert group selection: Refer to Global G1-G4 string selection of 3-5 Scan trigger mode & some global
settings.
Supplement digits: The Supplement digits barcode is the supplemental 2 or 5 characters. Format
Truncation/Expansion:
Truncate leading zeros- The leading “0” digits of UPC-A data characters can be truncated when the
feature is enabled.
Expand to EAN-13- It extends to 13-digits with a “0” leading digit when the feature is enabled. Truncate
system character- The system character of UPC-A data can be truncated when the feature is enabled.
Add country code- The country code (“0” for USA) can be added when the feature is enabled. Ink
Spreading Canceling:
If enabled, the scanner can more easily read the UPC-A barcode printed with ink
spreading. But it may cause the scanner to decode some well-printed UPC-A barcode wrongly.
Please ask the advice from the support engineer of the manufacturer before applying this function.
To Next Page
Loading...
