Check digit verification: The check digit verification is optional.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: Refer to Max./Min. code length of 3-12 Code 39.
Code ID setting: Refer to Code ID setting of 3-7 UPC-A.
Insert group selection: Refer to Insert group selection of 3-7 UPC-A.
Start/End type: Codabar has four pairs of Start/End pattern; you may select one pair to match your
application.
Start/End transmission: By setting Enable, the start and end character of a Codabar barcode will be
transmitted.
Start/End character equality: By setting Enable, the start and end character of a Codabar barcode must
be the same.
To Next Page
Loading...
