35
USER MANUAL
EN2. Dial 666* to block an engine or 999* to unlock it (after dialing 999* you should enter the “Secret PIN-
code” that is located on the owner’s card).
!
all oTher sysTem commands can be enTered in The same manner.
Changing settings via a phone
Enter the settings mode
Disarm the system, call the system number, wait for the answer, switch on the ignition for 1-3 seconds,
then switch it off. The system will enter the settings mode.
Example of changing the owner’s system number:
1. Enter the setting menu via a phone according to the instruction above;
2. Dial DTMF command 1*(phone number settings) and 1*(owner’s system number);
3. Enter new owner’s number in the format *XXXXXXXXXXX # (the system recognizes ‘*’ as ‘+’);
To confirm, dial 1*.
! There are 3 ways To change main owner’s phone number:
1. via a phone, using dTmf commands seTTings mode.
2. using radio Tags: Turn on The igniTion when The sysTem is disarmed and call The sysTem phone number. waiT for
The answer, Then press and hold The buTTon on The radio Tag for 2 seconds (unTil The second flash of The send
indicaTor). release The buTTon, The sysTem will recognize The incoming phone number as The “main owner’s phone
number.
3. using The pandora alarm sTudio applicaTions.
To Next Page
Loading...
