To Next PageTo Next Page
Need help?Do you have a question about the Pandora Camper Pro and is the answer not in the manual?
General| GSM | Yes |
|---|---|
| GPS | Yes |
| Bluetooth | Yes |
| Mobile App | Yes |
| CAN Bus | Yes |
| Immobilizer | Yes |
| Remote Engine Start | Yes |
| Shock Sensor | Yes |
| Tilt Sensor | Yes |
| Motion Sensor | Yes |
| Temperature Sensor | Yes |
Lists all components included in the Pandora Camper Pro system package.
Illustrates the physical placement of key system components within a vehicle.
Details the hardware features and capabilities of the main system unit.
Explains the private information contained on the owner's card and its uses.
Describes the function and usage of the external VALET button for system control.
Interprets the various visual signals provided by the system's LED indicators.
Explains system behavior and notifications when the vehicle is armed.
Lists and describes the different zones monitored by the security system.
Details the audible and visual signals used by the system for various events.
Describes the mode for protecting vehicle perimeter with passengers inside.
Explains arming/disarming using the original vehicle control.
Covers devices used for owner recognition and security functions.
Lists signal names and their corresponding sound descriptions from the beeper.
Describes automatic arming/disarming based on owner presence.
Explains owner recognition when the system is disarmed.
Details modes to prevent vehicle seizure when disarmed.
Explains using vehicle controls and a PIN for disarming and control.
Describes how to check the count of connected devices.
Instructions for powering the remote control on and off.
Explains the meaning of LED flashes on the remote control.
Guide on how to charge the remote control's battery.
Steps for updating the remote control's firmware.
A guide to understanding the icons displayed on the remote's screen.
Overview of shortcuts for common system functions via the remote.
Instructions for navigating and changing system settings using the remote.
Explains the actions performed by the radio tag's button.
Guide on how to replace the battery in the radio tag.
Steps to update the firmware of the radio tag.
Instructions for controlling the system via phone calls and DTMF commands.
Procedures to enable or disable the system's service mode via phone.
Information on accessing voice prompts for system commands.
Details on how to modify system settings using phone commands.
Steps to register for the pandora-on.com online service.
Instructions for logging into the online service or mobile app.
Guide on how to link the vehicle system to the online platform.
Information on accessing and understanding recorded system events.
Information on downloading and accessing the mobile application.
Controlling the system via Bluetooth connection with the mobile app.
Step-by-step guide to connect a mobile phone to the system.
How to navigate and use the features of the Pandora Camper Pro app.
Explains the meaning of various icons representing vehicle zones in the app.
Details the functions of the control buttons within the mobile application interface.
Methods for arming the security system.
Instructions for activating the Stay Home mode.
How to arm the system with a time delay.
Methods for disarming the security system.
Disarming the system using original vehicle controls.
How to lock/unlock doors with the ignition on.
Automatic door locking based on ignition or movement.
How to locate the vehicle using sound and light signals.
Activating the panic mode for emergencies.
Instructions for entering and using the system's service mode.
Procedure for entering the PIN-code using the VALET button.
Steps to disarm the system when normal methods fail.
Managing immobilizer and anti-hijack functions in emergencies.
Details the manufacturer's warranty terms and conditions.
Form for the installer to certify correct system installation.
Document confirming system conformity and production date.
Form to record purchase date and seller details for warranty claims.
