41
USER MANUAL
ENDisplayed zones:
Doors
Side door
Front hood
Trunk
Sunroof
Ignition
Brake pedal
Engine is running
On-board voltage
Fuel level
Interior/engine temperature
Outside temperature
Shock sensor
Tilt sensor
Motion sensor
Additional sensor
HANDS FREE function state
Siren sound notification state
BLUETOOTHDEVICES - displays the status of the connected DMS-100BT sensors.
CONTROL BUTTONS - this panel is used to control a system using buttons. To activate or deactivate
a function, press and hold the button for more than 3 seconds (this behavior is implemented to prevent
accidentally button presses.
Control buttons:
Arm/Disarm buttons
Stay Home button
Service mode button
Engine preheater control button
PANIC mode button
Update current state button
Time channel control buttons
noTe! you can change buTTon layouT in The “main menu – seTTings – conTrol buTTons”
1
2
3
4
5