43
USER MANUAL
ENArming
To arm the system when the ignition is off, use one of the methods described below. The system
will confirm the command with 1 short sound signal
and 1 flash of light signalization
.
Remote control
Shortly press the
, button on the remote control when you are in the radio coverage zone. The
remote control will play “ARMING” ringtone and security mode status icon (the lock) will be changed
to
.
Radio tag
A radio tag must be in the Bluetooth coverage area. Shortly press the control button
on the tag.
Slave mode
Shortly press the “Lock” button on an original remote control or use a sensor/button on a door handle
(for cars with an intelligent access system).
Phone
Call the system number. Wait for the answer. Dial the
1 *
. command.
To arm the system without siren signals dial the
1 0 *
command.
Online-service
Login to the PANDORA-ON.COM, when the system is online (there is an Internet connection) press the
on the control panel.
doors locking
system arming
SLAVE
HANDS FREE
PANDORA BT
1x /1x
SLAVE
HANDS FREE
MOBILE APP
To Next Page
