22 TELEMETRY SECURITY-SERVICE SYSTEM PANDORA PROFESSIONAL
In a few seconds the engine will be started, the remote will play the “ENGINE START”
ringtone and show spinning engine operation icon .
Note! Engine operation duration depends on system settings – either
heating time or threshold temperature for engine stop.
To remotely stop the engine while it performs heating, press and hold button
for 2 or more seconds. The engine will be immediately stopped and it will be
confirmed by remote playing the “ENGINE STOP” ringtone and the “Engine is running”
icon fading.
The remote will give notification 1 minute before designated engine stop: the
icon will flash and the “ENGINE STOP IN 1 MINUTE” ringtone will play every 10 seconds.
Sending the “REMOTE ENGINE START” command while the “ENGINE STOP IN
1 MINUTE”
ringtone is playing will extend its operation period by 10 minutes. This
procedure can be repeated multiple times.
“Engine stop”
ringtone
press
and hold
for 2 sec.
engine stop
To Next Page
Loading...
