23USER MANUAL
System settings menu
Main system parameters and settings can be changed using LCD remote. All actions in
the settings menu are performed by buttons.
Main menu:
Press and hold
5
button for 1 second to enter the main settings menu. To navigate
levels, shortly press
4
and
6
, buttons. To enter a sub-menu, set the cursor to the
desired setting and shortly press
5
button. If there is no any actions within 5 seconds,
the main menu will be closed. To exit the menu at any time, shortly press button.
WARNING! SYSTEM SETTINGS CAN BE CHANGED ONLY WHEN A REMOTE
CONTROL IS IN THE RADIO COVERAGE AREA.
decrease
enter/confirmation button:
parameter
is enabled
parameter
is disabled
save parameter
exit menu/submenu
navigation buttons:
increase
up
down
To Next Page
Loading...
Need help?
General
