34 TELEMETRY SECURITY-SERVICE SYSTEM PANDORA PROFESSIONAL
Receiving voice information via a phone
Call the system and listen to the status report.
1. System security status: armed/disarmed.
2. If the alarm was triggered, the system will communicate the cause, number of
events, time and date (in case events occurred more than 24 hours away).
3. Temperature sensors readings.
4. On-board voltage (to the nearest tenth of a volt).
5. GSM connection signal level.
6. Notification if the remote engine start is programmed, and on what conditions
(temperature, time, periodic start).
7. Current time and date.
8. Allows control command input.
9. Voice help in navigating control commands.
Control over the system via a phone
Call the system’s phone number. When it answers, enter command code.
• Return to the previous menu/state
• Repeat the last message
• Arming
• Disarming
• Silent arming
• Silent disarming
• Active security mode
To Next Page
Loading...
Need help?
General
