engine start
~~
OFF
ON
ACC
~~
xate the car
using a handbrake
leave the car, close the doors
short press
‘engine stop’
ringtone
in 3 sec. the engine will
be stopped, the system
is ready to perform
remote start
2. Turn the key in the ignition lock to the OFF position (the engine should still be
running) and take it out of the lock.
3. Leave the car, close the doors.
4. Press button to arm a car and lock doors. The “engine is running icon will
be spinning on a LCD remote and the security mode status icon will appear .
5. The engine will be stopped. Now the system is ready to perform remote and
automatic engine start.
Remote engine start
If the system is prepared for remote start, to execute it, press and hold button for 3
seconds. Sound signal will confirm the command, LCD will show flashing the “engine
is running” icon signifying preparation to the engine start.
To Next Page
Loading...
