26 TELEMETRY SECURITY-SERVICE SYSTEM PANDORA PROFESSIONAL
should be higher than the alarm level sensitivity for correct operation). Warning level is
indicated by one light and three sound signals
• “SHOCK” — This submenu allows adjusting sensitivity of the alarm and warning
zones of the shock sensor.
- Warning and alarm zones are enabled
- Warning and alarm zones are disabled
- Warning zone is disabled
• “MOTION” — This submenu allows adjusting sensitivity of the motion sensor
- Motion sensor is enabled
- Motion sensor is disabled
• “TILT” — This submenu allows adjusting sensitivity of the tilt sensor
- Tilt sensor is enabled
- Tilt sensor is disabled
• «EXTERNAL» — This submenu allows adjusting sensitivity of the alarm and warning
zones of the additional sensor .
- Warning and alarm zones are enabled
- Warning and alarm zones are disabled
- Warning zone is disabled
To Next Page
Loading...
Need help?
General
