40 TELEMETRY SECURITY-SERVICE SYSTEM PANDORA PROFESSIONAL
Switching on the immobilizer function
To restore the functions of immobilizer and Anti-hi-jack:
1. Call the system number and wait for the answer.
2. Dial
3. The system will confirm command execution.
Tow truck mode
This mode is intended for car transportation with preservation of arming
function. Tow truck mode can be activated only when the system is armed, it will be
deactivated automatically when.
1. Call the system number. If the system is in PANIC mode, receive an emergency
call. Wait for the answer.
2. Dial , to enable the “Tow truck” mode, the system will disable motion,
shock and tilt sensors. To end the session, hung up the phone.
3. To disable this mode, disarm the system.
Changing settings via a phone
To enter the settings programming mode:
Option 1. Disarm the system, call the system number, wait for the answer, press and
hold button on the main remote control for 3 seconds. The system will enter the
settings programming mode.
Option 2. Disarm the system, call the system number, wait for the answer, switch
on the ignition for 1-3 seconds, then switch it off. The system will enter the settings
programming mode.
WARNING! THE SYSTEM MUST BE DISARMED FOR CHANGING THE SETTINGS.
To Next Page
Loading...
Need help?
General
