48 TELEMETRY SECURITY-SERVICE SYSTEM PANDORA PROFESSIONAL
Unpairing a mobile device:
The LED indicator will light red after entering the level. Press the VALET button and
hold it for more than 4 seconds, release the button. The system will confirm deleting
with the series of sound signals of a siren and the system will return to mobile device
registration mode (the LED indicator will light green).
Saving changes:
To finish the registration of a mobile device, the VALET button should be pressed
once, the series of red and green flashes of the status LED indicator will confirm
the saving, switch on the ignition to automatically save the settings and exit the
programming mode.
WARNING! THE SYSTEM SUPPORTS ONLY ONE MOBILE DEVICE IF THERE IS NO
AUTOMATIC PAIRING, ENABLE ‘PIN REQUEST FOR PHONE PAIRING’ ITEM IN THE ‘RADIO
TAG AND MOBILE DEVICE FUNCTIONS’ SETTINGS AND MAKE PAIRING PROCEDURE
AGAIN. THE MOBILE DEVICE WILL REQUEST PINCODE 001111
To Next Page
Loading...
Need help?
General
