55USER MANUAL
external or located on the base unit VALET button. The digits input is indicated by an
external or located on the base unit LED indicator.
Entering the PIN-code:
•ENTER THE FIRST DIGIT• Press the
VALET button a number of times, equals
to the first digit. Pauses between presses
should not exceed 1 second. Each pressing
will be confirmed with an orange LED
indicator flash. A pause for more than
1 second and a red LED indicator flash
confirm the input of the first digit. Then you
can enter the next digit.
•ENTER THE SECOND DIGIT• Press the
VALET button a number of times, equals
to the second digit. Pauses between
presses should not exceed 1 second. Each
pressing will be confirmed with an orange
LED indicator flash. A pause for more than
1 second and a red LED indicator flash
confirm the input of the second digit. Then
you can enter the next digit.
• ENTER THE THIRD DIGIT • Press the VALET button a number of times, equals to
the third digit. Pauses between presses should not exceed 1 second. Each pressing
will be confirmed with an orange LED indicator flash. A pause for more than 1 second
and a red LED indicator flash confirm the input of the third digit. Then you can enter
the next digit.
To Next Page
Loading...
Need help?
General
