OPERATOR MANUAL Page 25 Getting Started
4.3 Clearing Jams
When a jam occurs, the paper path must be cleared. To do this, first
remove all the documents from the exit pocket and then free the track by
pressing Eject in your application.
In case of unsuccessful operation, apply the following suggestions:
1. Extract the jammed document simply by pulling it out with your
fingers
2. If the document does not pull out, lift the
inner cover at the point indicated by the
ribbed surface.
3. Grab the document with your fingers to
remove it from the transport
4. After the jam is removed, install the inner
cover by following the instructions on the
following page.:
To Next Page
Loading...
