Note:
When you
connect your
Pantech
Duo to your
computer,
Microsoft®
ActiveSync®
will
immediately
synchronize.
While your
device is
connected,
every change
on either the
computer or
the device
will be
synchronized.
26
Sync Your Device to Your PC
If You Have Windows Vista™ on Your PC
When you connect your Pantech Duo to your computer for the first time Windows® Mobile
Device Center should automatically start and ask you to create a Windows® Mobile partnership
with your device. Finish the setup wizard and Windows Mobile Device Center will synchronize
your Pantech Duo automatically.
Note: If Windows Mobile Device Center does not start click Start > Windows Mobile Device Center. If you do
not have Windows Mobile Device Center on your Windows Vista™ computer then you must download the
software from the Microsoft site.
If You Have Windows® XP on Your PC
Before you connect your device to your PC, you must install Microsoft® ActiveSync® 4.5 or higher
on your PC, which can be installed from the Getting Started CD.
1. After closing all open programs on your PC, insert the Getting Started CD into the CD drive
of your PC.
2. Follow the instructions on the installation wizard screen to install Microsoft® ActiveSync®.
3. Connect Your Device to Your PC with USB cable included in the box.
4. In Microsoft® ActiveSync®, follow the prompts in the Install Wizard, and select the items you
wish to synchronize.
5. Click “Sync”.
Connect to Other Devices
Sync Your Device to Your PC
To Next Page
Loading...
