Pantum M6550 series User Manual

89
2. Press "▲" or "▼" button to select and enter "Merge Scan" mode.
M6200/M6500/M6550 Series
M6600 Series
3. Press "Start" button and the Scan Process Bar Interface will pop up on the computer.
4. After completing scanning the first page, the contents as shown below will appear on the
control panel:
Press "Start" button - scan the next page
Press "OK" button- end the scanning
5. Put the document to be scanned on the glass platen and press Start button to continue to scan
the second page (For ADF scanning, it can run continuous scan directly).
6. Repeat the operation as described in the step 5 to scan multi-pages till you press "OK" button
to end this operation.
7. After completing the operation, the application will save PDF document to the specified folder.

Pantum M6550 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Print Speed	22 ppm
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	2, 000 pages
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Envelope, Label, Cardstock
Supported Operating Systems	Windows, Linux, Mac OS