Pantum M6550 series User Manual

71
8.3. Duplex Print
1) The printer driver supports manual duplex.
Note:
• If the paper is thin, it may wrinkle.
• If the paper is curled, make it flat and put it back into the manual feeder tray.
• If the manual duplex function causes a paper jam, see Chapter 13.1 for handling it.
2) Ensure that certain amount of paper is loaded into the automatic feeder tray before printing.
Note:
• For loading paper, see Chapter 2.4.
• For the media types that support printing, see Chapter 2.1. It is recommended to use
the standard paper.
• Some paper media are not suitable for the duplex printing. Trying the duplex printing
may damage the printer. When "Paper Type" is "Thick Paper" or "Transparent Film",
please do not try "Duplex Print". If you choose "Reversed Order" printing in Printing
Preferences dialog box, Manual Duplex will not be supported when "2 x 2 Poster"
printing.
• Paper may get jammed or cannot be fed in when the automatic feeder tray is loaded
with more than 150 sheets.
3) Printing steps are as follows (for Windows Operation System only) :
a) Open the document to be printed from the application (such as Notepad), and select "Print"
from the "File" menu.

Pantum M6550 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Print Speed	22 ppm
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	2, 000 pages
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Envelope, Label, Cardstock
Supported Operating Systems	Windows, Linux, Mac OS