Pantum M6550 series User Manual

47
4. Wired Network Settings (For printer models
that support wired network printing)
Printers that support wired network printing can be connected to the network, thereby the printer
will work under the control through a wired network.
Note:
• Due to printer upgrades, some functions may be different, depending on the model
you purchased. If you have any questions, please contact Pantum Customer Service.
4.1. Install the Printer to Network
Please refer to Chapter 3.1 to see the installation steps of NET Model.
4.2. Control the Network Printer
User can control the network settings through the built-in WEB Server in the printer.
4.2.1. View or Change Network Settings
1) View the IP address of the printer on its control panel according to steps in Section 7.3.
2) Type the IP address into the Web browser's address bar to access the embedded Web
server of the printer.
3) Complete the settings of the Networking Protocol, wireless network, Wi-Fi hotspot, address list,
e-mail and other relative configuration information in the “Setting”.

Pantum M6550 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Print Speed	22 ppm
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	2, 000 pages
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Envelope, Label, Cardstock
Supported Operating Systems	Windows, Linux, Mac OS