Pantum M6550 series User Manual

98
4) Click on "Adjust the Scanned Image Quality" on the bottom left corner of the above picture, the
advanced properties interface will pop up, then users can set the scan; After finishing the settings,
click on the "OK" button, then "Scan" button to start scan.
2.Photoshop
Operation Steps:
1) Launch Photoshop, click "File"- "Import" on the top left conrner and select WIA Scan, as is
shown below:

Pantum M6550 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Print Speed	22 ppm
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	2, 000 pages
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Envelope, Label, Cardstock
Supported Operating Systems	Windows, Linux, Mac OS