Pantum M6550 series User Manual

5
5
Paper Stop
6
Feeder Tray
7
Automatic Feeder Tray
8
Power switch
Note：
• The power switch of the printer is divided into two types: “touch type” and
“self-locking type”. The actual appearance of the purchased printer will prevail.
• The “touch type” power switch of the printer only has one mode, and can be reset by
short-pressing.
1) ON: short-press the power switch in the OFF state to turn on the power supply of
the printer.
2) OFF: long-pressure the power switch for about 3s in the ON state to turn off the
power supply of the printer.
• The “self-locking type” power switch of the printer has two modes: lock and
disconnect.
1) ON: short-press the power switch in the OFF state to turn on the power supply of
the printer.
2) OFF: short-press the power switch in the ON state to turn off the power supply of
the printer.
| Rear View
No.
M6200/M6500 Series
Diagram
1
USB Interface
2
Network Interface
3
Power Interface
4
Rear Cover

Pantum M6550 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Print Speed	22 ppm
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	2, 000 pages
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Envelope, Label, Cardstock
Supported Operating Systems	Windows, Linux, Mac OS