***IMPORTANT***
¯
THE pARABODY 950 ST MUST BE ASSEMBLED ON A FLAT, LEVEL SURFACE TO ASSURE ITS PROPER
FUNCTION.
PARABODY INC. STRONGLY RECOMMENDS THAT THIS PRODUCT BE ASSEMBLED B~( TWO PERSONS TO
AVOID" POSSIBLE INJURY.
¯
KEEP ALL FRAME CONNECTIONS LOOSE, UNTIL INSTRUCTED IN THE ASSEMBLY STEP SEQUENCES TO
SECURELY TIGHTEN. ~
¯
IF YOU EXPERIENCE ~IY PROBLEM WITH THE ASSEMBLY OF THIS PRODUCT, PLEASE CONTACT YOUR
DEALER OR YOUR PARABODY CUSTOMER SERVICE REPRESENTATIVE AT: 1-800-328-9’714
¯
TOOLS REQUIRED,: RATCHET, 3/4 SOCKET or WRENCH, 9/16 SOCKET or WRENCH, 7/16 SOCKET or
WRENCH, ADJUSTABI,E WRENCH, 1/8 ALLEN WRENCH, 5/32 ALLEN WRENCH, 7/32 ALLEN WRENCH, LEVEL,
and RUBBER MALLET or HAMMER
2
To Next Page
Loading...
