Paradox PCS200

Page 18
Configuring the PCS200
Troubles
The following sections and options have been added to support the IPPR512
GPRS/IP Monitoring Receiver.
Receiver
Settings
MG/SP/E EVO
Receiver #:
IP address*
IP port**
IP address WAN2
IP port WAN2
Receiver
password
†
Security profile
1
[929]
[930]
[931]
[932]
[933]
[934]
2
[936]
[937]
[938]
[939]
[940]
[941]
Backup
[943]
[944]
[945]
[946]
[947]
[948]
1
[2984]
2
[2986]
3
[2988]
4
[2990]
Module
registration -
press [
ARM] to
register
[935] [942] [949] [2985] [2987] [2989] [2991]
* For 1 or 2 digit numbers, add “0s” before the digit: e.g., 138.002.043.006
** Default 10000
†
Enter [MEM] for blank space
Note: When entering into Receiver Settings sections, the LCD screen of the control
panel’s keypad will display “Data” for the receiver password and security profiles
sections.
MG/SP/E Trouble Group MG/SP/E Trouble Sub-Group
[4] Communication Trouble [7] Fail to communicate with receiver
[9] GSM network failure
[
OFF] IP Receiver unregistered (IP/GPRS)
[10] Module supervision loss [9] GPRS/GSM module
EVO Trouble Group EVO Trouble Sub-Group