Page 26
Module Supervision Options
View GSM IP Information
It is possible to view the following GSM IP information in Master
Programming:
• IP Address: Access this to determine which IP address to enter in the
WinLoad or NEware GPRS connection settings. The IP address is
determined automatically when the PCS200 connects to the GSM
network. In order to properly read the IP address assigned, the GPRS
LED must be on.
• IP Port: Access this to determine which IP port to enter in the WinLoad or
NEware GPRS connection settings. This is the port that the module will
listen for incoming GPRS communication. This port is programmed in
section [2966] with Digiplex EVO or [920] with MG Series, SP Series,
E-Series.
• User PC Software Password: This password is needed to connect to the
control panel using the NEware software. This password is determined
in the NEware software.
SMS Phone Number Special Characters for EVO panels
*[stay]
# [force]
+[arm]
Other panels
*[off]
#[bypass]
+ [mem]
Event Call Options
Option Events that send SMS
[1] Any Alarm
[2] Arming and Disarming
[3] Any Trouble
[4] Any Trouble Restore
[5] to [8] Future Use
To Next Page
Loading...
Need help?
General
