Paradox PCS265V8 - List of SMS Commands

List of SMS Commands
Please note that the default password is admin.
Command
Description
P[password].A[IP address].P[port number]
Used for LTE remote access
P[password].IP.[call back phone number]
Used to obtain the IP address and IP port of the PCS265V8
P[password].RESET
Used to power cycle the PCS265V8
P[password].STATUS.[phone
number]
Used to obtain the signal strength,
signal quality, LTE connection status, and APN settings of the current SIM card
P[password].
APN1.NAME.
[Access Point Name]
Used to program the SIM Card 1 APN
P[password].
APN1.USER.
[Access Point Name]
Used to program the SIM card 1 APN User Name
P[password].
APN1.PSW.
[Access Point Name]
Used to program the SIM card 1 APN Password
P[password].
APN1.CLEAR]
Used to clear the SIM Card 1 APN
P[password].
VAPN1.[CALL BACK PHONE NUMBER]
Used to view the SIM Card 2 Access Point Name information
P[password]. APN2.NAME.
[Access Point Name]
Used to program the SIM Card 2 Access Point Name
P[password].
APN2.USER.
[Access Point Name]
Used to program the SIM Card 2 Access Point User
P[password].
APN2.PSW.
[Access Point Name]
Used to program the SIM Card 2 Access Point Password
P[password].
APN2.CLEAR
Used to clear the SIM Card 2 Access Point Name
P[password].
VAPN2.[CALL BACK PHONE NUMBER]
Used to view the SIM Card 2 Access Point Name information
P[password].[IP1W1/ IP1W2/
IP2W1/ IP2W2/ IP3W1/ IP3W2/
IP4W1/ IP4W2].[domain name]
Set domain name for LTE receiver
P[password].[IP1W1/ IP1W2/
IP2W1/ IP2W2/ IP3W1/ IP3W2/IP4W1/
IP4W2].CLEAR
Clear domain name for LTE receiver
C[user code].[ARM/OFF].A[area number], [area
number], [area
number]TO[area number]
Arm/Disarm
P[password].---S
Disable SWAN polling
(V8.0 and higher)
P[password].+++S
Enable SWAN polling
(V8.0 and higher)