PARAMOUNT BED CA-53380 - Bed Operation Procedures

18
●
The head end of the bed can be lowered.
The angle can be adjusted electrically up to 12⁰.
●
The head end of the bed can be raised.
The angle can be adjusted electrically up to 12⁰.
●
As shown in the picture on the left, a near seated
posture (chair position) can be created.
Chair position
25°
12°
70°
Trendelenburg
0° to 12°
OPERATION PROCEDURES
6
0° to 12°
Reverse Trendelenburg
※4 motors type only
※4 motors type only
※4 motors type only
●
The angle of the back section base and knee
section base and inclination angle of the bed
can be adjusted to 0⁰ (flat).
Flat function
※4 motors type only