There are a total of four side-rails, two side-rails on the left and right, respectively.
●Side-rails prevent the patient from falling off the bed.
●All the side-rails are provided with shock absorber.
[Raising the side-rails]
①Lift the side-rail and push in until it clicks into place.
②Pull the side-rail to make sure that the side-rail is
locked.
[Lowering the side-rails]
①Use one hand to hold the grip of the side-rail and
push it.
②Use the other hand to pull the operation lever toward
you with pushing the side-rail to opposite direction
and, while supporting the side-rail, lower the side-rail
Side-rail position when it is raised. Side-rail position when it is lowered.
Operation lever
The side-rails have a Anti-tampering Lock Feature that keeps the patient safely within bed
by preventing the side-rails lock from being released when the patient is leaning against the
side-rail. This prevents the patient from falling over when he is attempting to lower the
side-rail by himself.
Grip
To Next Page
Loading...
