4. Oxygen cylinder holder (φ115mm)
Make sure that the knob bolt is firmly tighten. There is a risk of insufficient oxygen supply.
●When using the oxygen cylinder, take care to prevent it from coming into contact with any objects
in the vicinity of the bed. There is a risk of an injury by damage of a flow meter or an oxygen
cylinder if the cylinder comes into contact with another object.
●Load capacity is 15kg. Do not insert the oxygen cylinder exceeding the load capacity because it
may damage the oxygen cylinder holder, resulting in injury.
For any queries, please feel free to contact Paramount Bed or your distributor.
The oxygen cylinder holder can be used by inserted into one of the option attachment holes.
Insert the oxygen cylinder holder into one of the option attachment holes.
②The oxygen cylinder holder can be set in two positions as shown in figure. After setting, make sure
that the oxygen cylinder holder does not rotate.
③Loosen the knob bolt on the oxygen cylinder holder, and then slowly insert the oxygen cylinder into
the holder from the top.
④Firmly tighten the knob bolt to fasten the oxygen cylinder.
To Next Page
Loading...
