EasyManua.ls Logo

PARAMOUNT BED CA-53380 - Product Symbol Definitions

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Symbol
Description
Symbol
Description
●CE mark
●Authorised representative
in the european community
●Indoor use symbol
●Safe working load
●Electrical waste
●Maximum user weight
●Refer to the instruction manual
●Maximum weight
(Product weight + Safe working load)
●See the instruction manual
●The medical bed for adults
●Type B applied part
●Applied parts are considered to be:
Upper frame section, Controllers,
Side-rails, Headboard and Footboard.
●4 casters in locked status (Lock
position)
●AC input
●4 casters in unlocked status (Free
position)
●Protection code
●Bed transportation status (steering
position)
●Protective ground mark
●Pull the emergency CPR lever.
●Manufacturer for CE mark
●Do not operate the bed while the
patient's body is sticking out of
the gap.
●Date of manufacture
●Do not stand on the side-rail.
●Do not attach the board in the wrong
  way.
●Use the suitable mattress described
in the instruction manual.
●Country of manufacture
(Made in China)
●Take care to prevent the patient’s
head from getting caught in the gap
between the side-rails and the bed.
●Country of manufacture
(Made in India)
●Take care to prevent body part from
getting caught in the moving part on
the bed.
●Medical device
(This product is a medical device in
Europe, and may be a medical device in
some countries and regions depending
on their regulations.)
●Model number
●Country of manufacture
(Made in Vietnam)
●Serial number
48
■The symbols below are used for the product.
PRODUCT SYMBOL DEFINITIONS
10
IPX4

Table of Contents