Do not drop the handheld controller or pull the cable. The handheld controller may get damaged or
deformed, causing it to operate incorrectly. Request repair (or replacement) of a damaged handheld
controller, if necessary.
The handheld controller must be properly set in the storage position or hung the side-rail using one
hook with the buttons facing out. Otherwise, when the bed or side-rail is operated, buttons on the
handheld controller could be pushed and the bed could be operated unexpectedly, causing damage
to the handheld controller.
The Lock-out switch can be used to disable the handheld controller operation.
The Lock-out switch is located on right side of the bed, below the hip section base.
[Locking the handheld controller operation]
Rotate the switch to the lock position.
[Unlocking the handheld controller operation]
Rotate the switch to the unlock position.
Store the handheld controller in the handheld controller storage position on the side-rail
near to the headboard.
Handheld controller
To Next Page
Loading...
