PARAMOUNT BED CA-53380 - Page 9

8
■Keep the bed away from fire.
●
Do not use thermal appliances such as heaters near the bed. Otherwise, the bed may be damaged
or deformed, or even catch fire.
■When moving the bed, watch your step.
●
Your leg may bump into the caster operation pedal or your foot may get caught by a caster,
resulting in injury.
■Lock the casters at all times except when moving the bed.
●
The bed may move when a patient gets into or out of the bed, resulting in an unexpected injury.
When moving the bed, operate the caster operation pedal and unlock the casters.
■Do not step on the caster operation pedal.
●
There is a risk of injury due to falling or damage to the bed.
■
Do not combine the bed with products other than the suitable products specified by
Paramount Bed.
●
For options directly attached to the bed such as mattresses, use suitable products specified by
Paramount Bed. Using other products may create unintended gaps, cause interference between
products, or lower the product safety, which may result in injury or operational failure.
■
Make sure that there is nothing in the board attachment holes or the option attachment
holes when mounting the boards or the accessories.
●
If there are obstacles in the attachment holes, you cannot mount the boards or the accessories,
and the patient may fall off the bed or get caught in the gap, resulting in injury.
■Do not use a mobile phone or other wireless device in the vicinity of the bed.
●This could cause the bed to malfunction or affect other medical equipment.
■Do not spill liquids on the bed.
●
Do not spill liquids on the bed’s electrical components, such as the motors, handheld controller. This
could cause an electric shock due to a short circuit or product failure. If liquids are spilt accidentally,
disconnect the power plug from the power outlet and contact Paramount Bed or your distributor.
■Do not attach a restraint belt to boards or side-rails.
●The belt could unexpectedly come off, resulting in injuly, or the bed could get damaged or deformed.
■
When attaching the restraint belt to mattress base, put it through the mounting bracket
of the mattress base.
●
If the restraint belt is attached to something other than the mounting bracket, the belt could
unexpectedly come off, resulting injuly, or the bed could be damaged or deformed.
■During operation, be careful not to trap the tubes.
●
It may cause damage to the tubes and devices or be trapped within the moving bed parts, resulting
in injury.
SAFETY PRECAUTIONS
2