Parker AC30 series - Dimensions for Panel Mount Installation; Top & Bottom Cover Removal

English 1-5
Dimensions for Panel Mount Installation
Dimensions for Through Panel Installation see the full AC30 Product Manual – Chapter 4 Installation.
Mechanical Dimensions for AC30 Drive - Frame D Illustrated
Models
Max. Weight
kg/lbs
H H1 H2 W W1 W2 D Fixings
Frame D 4.5 (10)
286.0
(11.26)
270.0
(10.6)
6.5
(0.25)
100.0
(3.93)
80.0
(3.15)
10.0
(0.39)
255.0
(10.0)
Slot 4.5mm wide
Use M4 fixings
Frame E 6.8 (15)
333.0
(13.11)
320.0
(12.6)
6.5
(0.25)
125.0
(4.92)
100.0
(3.93)
12.5
(0.49)
255.0
(10.0)
Frame F 10.0 (22)
383.0
(15.07)
370.0
(14.5)
6.5
(0.25)
150.0
(5.90)
125.0
(4.92)
12.5
(0.49)
255.0
(10.0)
All dimensions are in millimetres (inches)
Top & Bottom Cover Removal
To remove top and bottom covers, insert a screwdriver straight into the slot and push to release the
catch, then slide off cover. For fitting instructions see Chapter 4 – Installation in the AC30 Product
Manual.