Parker F11 series - Preparation; Tools Required

Bulletin MSG30-5511-M1/UK
6
Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Service Manual/Spare Parts
Series F11
Preparation
Before disassembling motor:
• Always keep work space clean
• Always use correct tools
• Make documentation and take
photos if required
• Only use standard spare parts
from Parker
Tools required
• Retaining ring tool, internal and
external
• Hex key
• Screw driver
• Plier
• Plastic hammer
• Mandrel
• Hook tool
• Torque wrench
• Brush
• Hydraulic press
Preparation, Tools required