Publication PSS-UM001A-EN-P – December 2016
Confi gure the DeviceNet Scanner Subnet 4-5
Following are the remaining confi guration windows.
This completes the confi guration options. Your scanner must go on
line for confi guration changes to take effect.
ADR window
Use this screen
to choose
Automatic Device
Replacement
options.
You must have
loaded each device
into RSNetWorx
for DeviceNet
before you can
Load Device
Config using
this button.
IMPORTANT
You cannot change any confi guration parameters on this screen.
It is for information purposes only. These buttons do not apply
for this window, but are here to maintain consistency among
the windows.
To Next Page
Loading...
