Parker H Series - Page 77

H Series Fieldbus 24 VDC Analog Input Modules, Series A (PSSNACM12A, PSSNAVM12A) E110P
6
If your RSLogic 5000 is Version 15.X or greater:
 •Choose the PSSNACM12A module from the list of Parker
modules.
 •EnteranameandclickOK.
•Notice that the PSSNACM12A is now under the I/O
configuration.
Add Analog Input Modules to RSLogix 5000
I/OConguration
To add your analog input modules to RSLogix 5000 I/O configuration,
follow these steps:
 •InRSLogix5000:
- For ControlNet, highlight the PSSCCNA or 1738-ACNR
Shown), right click and select New Module.
- For EtherNet/IP, highlight the PSSCENA or1738-AENT
(Shown), right click and select New Module.