PowerTilt Tilting Coupler
PowerTilt Series Service & Repair Manual
HY34-1410
34
Parker Hannifin Corporation
Helac/Cylinder Division
Enumclaw, Washington USA
www.parker.com/helac
6.
4.
2.
1.
5.
3.
NOTICE
All numbers that appear in
parenthesis ( ) in the following
sections are referring to items
on Page 25.
The PowerTilt is comprised of the following
components:
1. Housing with integral ring gear
2. Shaft
3. Piston sleeve assembly
4. End cap
5. Lock ring
6. Standard pin-on coupler
Secure product to work bench.
Spraying fluids:
Contents under pressure.
Wear approved eye protection.
Use caution when removing
port plugs and fittings.
CAUTION
Disassembly
Component Identification
Make sure work area is clean.
To Next Page
Loading...
