Page 21
MANU RATE
Factory setting:
GRADE: 2
This function is used for setting the adjustment rate for the valve stroke in the manual mode.
The grade of adjustment rate: 1 - 5, 1 is the slowest adjustment rate, 5 is the fastest adjustment rate.
Use the arrow keys to scroll to MANU RATE and press the SET key to open. Use the arrow keys to adjust the GRADE. Use the
OK key to set the GRADE. Press the EXIT key to return to the main menu.
Figure 24. Operating sequence MANU RATE
CODE
Factory setting:
Code: 0000
Protect options: none
The CODE function is used to prevent some soft functions of the positioner from being accessed. If enabling the CODE
function, the user needs to input the code before opening the protected menu or running the protected functions.
Use the arrow keys to scroll to CODE and press the ENT key to open. Use the arrow keys to input the code. Use the OK key to
set the code and open the selection menu. Press the SEL key to set the code for desired feature. Press the EXIT key to return
to the main menu.
Figure 25. Operating sequence CODE
To Next Page
Loading...
