Parker RAC Europe PSD04 | User manual ver. 3.6 | Code 144PSDI364
Page 16 of 74
4.3 Additional information for electrical connection
- do not operate on the terminal blocks of the device using electrical or pneumatic screwers
- if the device has been moved from a cold location to a warm one, the humidity could condense on the inside;
wait about an hour before supplying it
- make sure the power supply voltage, the electrical frequency and the electrical power of the device correspond
to those of the local power supply; look at chapter 11 “TECHNICAL DATA”
- disconnect the power supply of the device before servicing it
- do not use the device as safety device
- for the repairs and for information about the device please contact the Parker RAC Europe sales network.
To Next Page
Loading...
