Parker PSD04 - Page 47

Parker RAC Europe PSD04 | User manual ver. 3.6 | Code 144PSDI364
Page 47 of 74
CANb 0 4 - - - - 1 Manufact.
CAN baud rate
0 = 10K
1 = 20K
2 = 50K
3 = 125K
4 = 500K
Par. Min. Max. Units Default Menu Command
Pr02 0 2 - - - - 0 User
functioning mode
0 = SH-ALGORITHM
1 = manual mode
2 = debug functionality
Pr03 0.00 100.00 % 0.00 User
manual setpoint position (only if
Pr02 = 1)
ResR 0 1 - - - - 0 User resynchronization request
EnaV 0 1 - - - - 0 User
enable valve command (RS-485 or
external MODBUS)
0 = disable valve
1 = enable valve
Cmd 0 65535 - - - - 0 User
command (b0: 0 -> 1 reset
parameter alarm; Cmd: x -> 0zBx
reset application; Cmd: x -> 0x5x
reset board)
Par. Min. Max. Units Default Menu Status
UdM - - - - - - - - - - - - - - - - User
internal unit of measure
b0: 0: pressure in bar
1: pressure in psi
b1: 0: temperature in °C/K
1: temperature in °F/R
b2: 0: conversion ok
1: conversion in progress or
halted
DrvM 0 5 - - - - - - - - User
driving mode
0 = full step 2 ph on
1 = full step 1 ph on
2 = reserved
3 = reserved
4 = reserved
5 = reserved