Parker SciLog LabTec - Pressure Sensor Installation

38


4
7.0 Pressure Sensor Installation
The SciLog
®
SciPres
®
pressure sensors are connected
in-line with the tubing and used in a flow through manner.
The SciPres
®
sensors have polysulfone and silicone
wetted surfaces.
The SciPres
®
sensors are available in 5 different sizes.
Luer units ship with the LabTec™ under normal situations,
but they are available in 3/8 ¨ and1/2 ¨ hose barb, as well
as3/4
¨ and 1.0¨ Ladish TC styles. The SciPres
®
pressure
sensors
re easy to change when the need arises, and are
readily
available from Parker in packs of 5. They may be
sanitized using several methods, CIP with NaOH or alcohol,
autoclaved up to twice, or gamma irradiated.
Caution: Make sure you have secured all of the
connecting tubing for the pressure sensors with nylon
cable ties.