Parker SciLog LabTec - Safety Precautions and System Introduction; Essential Safety Guidelines

4


Precautions
WARNING
DISCONNECT ALL POWER TO THIS UNIT BEFORE
INSTALLING, SERVICING, CLEANING OR REMOVING
THE FUSE. FAILURE TO DO SO COULD RESULT IN
BODILY HARM AND / OR PROPERTY DAMAGE.
CAUTION
OBSERVE PRECAUTIONS FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES.
WARNING
ONLY PERMIT QUALIFIED PERSONNEL TO SERVICE
THIS EQUIPMENT. EXERCISE CARE WHEN MAKING
CHECKS, TEST AND ADJUSTMENTS THAT MUST BE
MADE WITH POWER ON. FAILING TO OBSERVE THESE
PRECAUTIONS CAN RESULT IN BODILY HARM.
WARNING
FOR CONTINUED PROTECTION AGAINST SHOCK
HAZARD, CONNECT TO PROPERLY GROUNDED
OUTLET ONLY. DO NOT REMOVE THE GROUND
PRONG.
 IFTHEPOWERCORDIS LOSTORDAMAGED,CONTACTCUSTOMERSERVICE
TOOBTAINANEWONE.DONOTREPLACEITONYOUROWN.
READ this manual BEFORE operating or servicing this equipment.
FOLLOW these instructions carefully.
DO NOT allow untrained personnel to operate, clean, inspect, service or tamper with
this equipment.
ALWAYS DISCONNECT this equipment from the power source before cleaning or
performing maintenance.