64
Clicking on OK leaves the operator this screen, ready to start collecting data from the LabTec™.
When ready, press Exec on the LabTec™, and then RUN. The data will automatically be placed
in the cells of the spreadsheet. The text box in the upper left of the spreadsheet contains the
header information, listing the Mode, the date and time, all operating parameters, alarm settings
and alarm limits.
A finished run could look like this:
Note: The column headings on the spreadsheet will change based on the mode. When finished
with a run, click on File-Save as: and choose an appropriate file name. For another run, simply
press the “Clear Data” button, or close and re-open the original file.
The STOP and RUN keys on the LabTec™ may be used to interrupt the filtration process. The
LabTec™ only sends data at the end of the dispense cycle.
To Next Page
Loading...
