USB Data Link Adapter 14
Using the USB-DLA
5.1.1. Load the USB drivers
The USB-DLA will be detected automatically when it is plugged into your laptop.
The first time the device appears on a USB port, Windows will launch the Found New
Hardware Wizard in order to load the USB drivers. Windows will do this every time
the device appears on a new USB port (e.g., if you attach the USB-DLA to a new hub,
Windows will want to install the driver for each port on the hub). The USB drivers are
loaded like any other USB device. The following example shows how the drivers are
loaded in Windows XP. Select Install the software automatically (Recommended)
and click Next.
Figure 7: Found New Hardware Wizard
To Next Page
Loading...
General