Parker USB-DLA - Software Files and Locations; Files Copied During Software Installation; Default File Locations (All Versions of Windows)

USB Data Link Adapter 28
Appendix B
8.4. Software Files and Locations
If you experience difficulty installing the software or if you want to update only one
file it may be easier to manually copy the files into the proper locations.
8.4.1. Files copied during software installation:
ve121032.dll: RP1210 API. Receives RP1210 calls and hands them off to a VAPI.dll
Interface.
VE121032.h: Header file that contains the parameter, error definitions and
prototypes of the functions exported by VE121032.dll.
VAPI.dll: Vansco API that passes data from applications to the VAPIserver. Multiple
copies of the dll's can be running at any given time.
VAPIserver.exe: Provides the interface between the dll's and the DLA hardware. Only
one VAPIserver is running at any time.
dlapnp.sys: Plug and play driver for USB DLA
usbdla.sys: USB DLA driver
Readme.txt: Installation information
8.4.2. Default File locations (all versions of Windows):
C:\Program Files\Vansco\USB DLA\Driver\dlapnp.sys
C:\Program Files\Vansco\USB DLA\Driver\usbdla.inf
C:\Program Files\Vansco\USB DLA\Driver\usbdla.sys
C:\Program Files\Vansco\USB DLA\udutool.exe
C:\Program Files\Vansco\USB DLA\RP1210Chooser.exe
C:\WINDOWS\system32\VAPIserver.exe
C:\WINDOWS\system32\VE121032.dll
C:\WINDOWS\system32\VAPI.dll
Running a newer version of the setup program will install updated versions of the
USB drivers and applications. The updated version of the applications will be copied
over existing versions installed on your PC. The USB driver will also be copied onto
your PC.