GB IE
6
NI
Introduction
Congratulations on the purchase of your new device. With it, you
have chosen a high quality product.
During production, this equipment has been checked for quality
equipment is therefore guaranteed.
contain important information on safety, use and disposal.
Before using the product, familiarise yourself with all of the oper-
ating and safety instructions. Use the product only as described
in the event that the product is passed on, hand over all docu-
ments to the third party.
Translation of the original
EC declaration of conformity .................................. 33
Content
Introduction ............................................................ 6
Intended purpose .................................................... 6
General description ................................................. 7
Extent of the delivery .......................................................7
Overview .......................................................................7
Functional description ......................................................8
Technical data ......................................................... 8
Safety instructions ................................................... 8
Symbols and icons ..........................................................8
Symbols on the appliance ................................................8
Graphical symbol additionally on the saw blades ...............8
Symbols in the manual .....................................................9
Safe operation ................................................................ 9
Additional safety instructions ..........................................10
Safety instructions for handling saw blades ......................10
.............. 11
Safety Instructions for Handling the Laser .........................11
Safety Instructions for Handling Batteries ........................ 11
Residual Risks ...............................................................11
Electrical Connection .....................................................11
Important Instructions ..................................................... 12
Faulty Electrical Connection Cable .................................12
Alternating Current Motor ..............................................12
Assembly .............................................................. 12
Assembling the frame and table width extender with length
extender ......................................................................12
....12
Mounting / dismounting the Saw Blade Guard ................13
...............................................13
Attaching/changing the Saw Blade .................................13
Connect the suction device .............................................13
Before putting into operation ..........................................13
Operation ............................................................. 14
Switching on and off .....................................................14
Adjusting the Cutting Depth ............................................ 14
........................................14
Adjusting the Stop Height .............................................14
......................................................14
Adjusting the Cutting Width .........................................14
Adjusting the Stop Length ............................................... 14
............................................14
.............................................................14
............................14
Angle Adjustment .......................................................... 15
Adjusting the Laser .......................................................15
Using the Laser ............................................................15
Use ...................................................................... 15
.........................................15
Cutting narrow Workpieces .......................................... 15
Cutting very narrow Workpieces ..................................... 15
.................................................... 16
............................................. 16
Cutting Chipboard ........................................................16
Collection bag for wood residues ....................................16
.....................................................................16
Cleaning and Servicing.......................................... 16
Cleaning ......................................................................16
Storage ................................................................. 16
Waste disposal and environmental protection ....... 16
Trouble shooting ................................................... 17
Spare parts/Accessories ........................................ 17
Guarantee ............................................................ 17
Repair Service ....................................................... 18
Service-Center ....................................................... 18
Importer ............................................................... 18
Intended purpose
-
hwise and crosswise (only with the transverse stop), depending
on the machine size. All types of round timbers must not be cut
Any other use beyond that is considered to be not in accordance
types of resulting damage or injury and not the manufacturer.
-
table for the machine (HM or CV saw blades).
prohibited. Use in accordance with the designated purpose is
also deemed to include observance of the safety instructions, as
well as the assembly and operating instructions in the operating
manual.Individuals who operate and maintain the machine must
be familiar with it and must have been instructed in possible ha-
zards. Moreover, the latest accident prevention regulations must
-
onal health and safety technology must be complied with.
To Next Page
Loading...
